• Remote+SD Card Controller for pixel light

• Can control More than 4000 pixels light

• Can control many types of the IC

H805SB is a LED controller that is capable of controlling a variety of single or double-line driver chips with one port and has infrared remote control and nixie tube display functions. The maximum clock frequency of H805SB is 9.9 MHZ and can control maximum 4096 pixels.

Auxiliary software is “LED Control Software”.

The followings are the single-line driver chips: LPD1882, LPD1889, LPD6812, UCS1903, UCS1909, UCS1912, WS2811, TM1829, TM1812, TM1809, TM1804, TM1803, TLS3001, BS0825, BS0901, etc.

The followings are the double-line driver chips: LPD6803, LPD8806, LPD6813, DMX512, APA102, UCS6909, UCS6912, WS2801, WS2803, DZ2809, LPD5109, P9813, SM16716, SD600, etc.

Data is outputted to DMX512 via the 245 chip, if the 485 chip is needed, please specify when ordering.

The type of LED driver chip must be set in the software; the same time-sequence driver chips share an option. The type of driver chip only displays a representative name in computer property.

DMX512 and single-line driver chips can only control 2048 pixels; other chips can control 4096 pixels.

Performance

1.With only one output port, control maximum 4096 pixels. Single-line driver chips and DMX512 control maximum 2048 pixels.

2.SD card supports FAT32 and FAT16 format, the max capacity is 32G bytes, stores max 64 DAT files, which are played based on file name in alphabetical order.

3.H805SB has three work modes: DAT mode, monochrome mode and blending mode. Only the following chips support the monochrome mode and blending mode: LPD6803, LPD8806, APA101, APA102, UCS6909, UCS6912, WS2801 and SD600.

DAT mode is the default mode after power-on and the DAT file is required in SD card; in monochrome mode and blending mode, you can modulate the color and get different levels of grayscale of red, green and blue by remote control. You can also get other colors by adjusting the brightness of the three colors and mixing them.